3
3
Installing
The indicator is part of a Walk Over Weighing (WOW) system, specifically designed
for dairy and other applications where cattle are regularly weighed.
The WOW system typically includes a WOW platform, load bars, an EID panel reader
and antenna. It may also include an auto drafter. The indicator needs to be used with
third party management software which can analyse and present weight trend
information. Technical integrators should contact Tru-Test for further information.
The
WOW2 Integration Guide
provides more detail about integrating the indicator
into a WOW system. This document is only available to installers and technical
integrators.
A typical dairy installation
This installation includes an auto drafter. An EID panel reader
and antenna have been installed at the end of platform.
The WOW platform has load
bars beneath.
Connecting the indicator to an EID panel reader
Typically, the indicator will be connected to an EID panel reader using the cables
supplied (as shown in the picture above). Alternatively, the connection may be made
via
Bluetooth
®
.
Connecting via
Bluetooth
1.
First
, switch on the indicator.
2.
Then, switch on the EID panel reader.
For further instructions on pairing the EID panel reader, see the EID panel reader
user manual.
