4
Installing the energizer inside
The energizer must be installed inside when
being powered by the mains/line power supply.
Warning!
-
Do not use a mains/line power extension
lead.
-
All countries except USA and Canada:
Allow 25 mm (1‛) of clear space around
the power adaptor.
To install the energizer inside:
1
Select a suitable installation site. See
Selecting a site for the installation
on page
3.
2
Mount the energizer on a wall. Use the
template printed on the back cover of this
manual, if required.
3
Connect the Fence earth terminal (green)
to the earthing system.
4
Connect the Fence output terminal (red) to
the fence.
5
Connect the energizer to the mains/line
power using the mains/line power
adaptor.
Note:
If the energizer is being installed inside,
it may be powered by a battery, as an
alternative to the mains/line power supply.
Installing the energizer outside
The energizer may be installed outside,
powered by a battery.
Warning!
USA/Canada - Refer to
Important
safety instructions for Class 2 power units
(USA/Canada only)
on page 13. All other
countries - Do not power the energizer with
mains/line power if it is being installed
outdoors.
To install the energizer outside:
1
Select a suitable installation site. See
Selecting a site for the installation
on page
3.
2
Hang the energizer on a fence wire or
mount the energizer on a post. Use the
template printed on the back cover of this
manual, if required.
3
Connect the Fence earth terminal (green)
to the earthing system.
4
Connect the Fence output terminal (red) to
the fence.
5
Connect the energizer to the battery using
the battery leads. Attach the + (red) clip
to the positive terminal of the battery, and
the – (black) clip to its negative terminal.
Note:
This energizer may be used as part of a
solar installation by connecting it to a battery
and solar panel(s). For information about solar
installations, refer to the product’s website (see
packaging for details).
