TRAMPOLINE FRAME ASSEMBLY
12
Step 2
– Leg Support and Top Rail with Leg Socket Assembly
At this point, two people will be needed to assemble the trampoline.
Connect Vertical Leg Extensions (# 6A and # 6B) to Leg Base (# 5) as shown below (the assembled parts
will be hereinafter referred
to as “Leg Support”).
Lift two sets of the assembled Leg Supports to a vertical (standing) position. Connect one end of Top Rail
with Leg Socket (# 3) to Vertical Leg Extension (# 6A) and the other side to Vertical Leg Extension with 2
holes (# 6B) as shown below. Repeat in the same manner to assemble all Leg Supports.
Hint:
Make sure the larger indented hole
on Vertical Leg Extension (# 6B) is facing outward. This is
important for installing the enclosure later.
Leg Support
DO NOT PLACE HANDS NEAR
THEOPENING WHEN
CONNECTING THE TUBES.
WEAR PROTECTIVE GLOVES
TO PROTECT FROM INJURIES
DURINGASSEMBLY.
LARGER INDENTED
HOLES MUST
FACE OUTWARD
