Standards .........................IEEE802.3 10BASE-T
..........................................
IEEE802.3u 100Base-TX
..........................................
IEEE802.3x
Network media (cable) ......
10BASE-T: Category 3, 4, 5 UTP cable (≤ 100 m)
..........................................
100BASE-TX: Category 5 UTP cable (≤ 100 m)
Industry standards ............
FCC CFR47 Part 15, EN55022/CISPR22, Class A
EMS
.............................. ....
IEC61000-4-2 (ESD): ±8 kV (contact), ±12 kV (air)
..........................................
IEC61000-4-3 (RS): 10 V/m (80 MHz - 2 GHz)
..........................................
IEC61000-4-4 (EFT): Power port: ±2 kV; Data port: ±1 kV
..........................................
IEC61000-4-5 (Surge): Power port: ±1 kV/DM, ±2 kV/CM;
Data port: ±1 kV
..........................................
IEC61000-4-6 (CS): 3 V (10 kHz - 150 kHz); 10 V (150 kHz - 80 MHz)
..........................................
IEC61000-4-16 (Common mode conduction): 30 V (cont.), 300 V (1 s)
Dimensions (W x H x L) ....128 x 35 x 98 mm
Weight ..............................320 g
Ambient temperature
during operation ................-40 °C to +75 °C
Ambient temperature
during storage ...................-40 °C to +75 °C
Ambient humidity
during operation ................
5% to 95% rel. humidity, non-condensing
12 Technical data
Item No. 2436042
Ports .................................5x RJ-45 auto-MDI / MDI-X
Specifications
...................Bandwidth: 10 Gbit/s
..........................................
Buffer packet memory: 1.2Mbit
..........................................
Forwarding rate: 1488095 pps/port
..........................................
MAC address table: 2 K
Installation ........................DIN rail
Max. frame size
................
1522 bytes packet size
Flow control ......................Back pressure for half duplex
..........................................
IEEE 802.3x pause frame for full duplex
Housing ............................IP40 metal housing
LED status indicator .........Power: Red
..........................................
Ethernet: Yellow
Operating voltage .............12 - 52 V/DC (Redundant dual)
Power consumption ..........3 Watts
Surge protection ...............ESD (Ethernet): 8 KV/DC
..........................................Surge (power supply): 2 KV/DC
Standards .........................IEEE802.3 10BASE-T
..........................................IEEE802.3u 100Base-TX
..........................................IEEE802.3ab 1000Base-T
..........................................IEEE802.3x
Network media (cable) ......
10BASE-T: Category 3, 4, 5 UTP cable (≤ 100 m)
..........................................
100BASE-TX: Category 5 UTP cable (≤ 100 m)
..........................................
1000BASE-TX: Category 6 or better UTP cable (≤ 100 m)
Industry standards ............
FCC CFR47 Part 15, EN55022/CISPR22, Class A
EMS
.............................. ....
IEC61000-4-2 (ESD): ±8 kV (contact), ±12 kV (air)
..........................................
IEC61000-4-3 (RS): 10 V/m (80 MHz - 2 GHz)
..........................................
IEC61000-4-4 (EFT): Power port: ±2 kV; Data port: ±1 kV
..........................................
IEC61000-4-5 (Surge): Power port: ±1 kV/DM, ±2 kV/CM;
Data port: ±2 kV
..........................................
IEC61000-4-6 (CS): 3 V (10 kHz - 150 kHz); 10 V (150 kHz - 80 MHz)
..........................................
IEC61000-4-16 (Common mode conduction): 30 V (cont.), 300 V (1 s)
Dimensions (W x H x L) ....128 x 35 x 98 mm
Weight ..............................360 g
Ambient temperature
during operation ................-40 °C to +75 °C
Ambient temperature
during storage ...................-40 °C to +75 °C
Ambient humidity
during operation ................
5% to 95% rel. humidity, non-condensing
7 LED status indicator
The LED indicators provide information about the operating status in real time.
LED
Status
Information
POWER
ON
Indicates that the switch is on.
OFF
No power supply
Link/Act
Yellow "on"
Connection is active
Yellow "flashing"
Indicates that the switch is actively sending or
receiving data via this port.
Yellow "off"
No device is connected to the corresponding port.
8 FAQ
The power supply indicator (POWER) is off.
Check the power supply at terminals P1 and P2.
Is the terminal strip (2)
firmly inserted in the socket?
Is the power supply between 12 and 52 V/DC?
The Link/Act LED is off.
No data is being sent on the network.
Is the network cable intact and plugged in at both ends?
No data is being transferred on the switch. Check that the network automatically receives IP
addresses. The switch does not assign IP addresses.
9 Cleaning and care
This product does not require any maintenance. Never attempt to dismantle it. Disconnect
the product from the mains supply before cleaning. Dust can easily be removed using a
clean, soft brush and a vacuum cleaner. Do not use aggressive cleaning agents, as these
can cause discolouration. To prevent scratch marks, do not press too strongly on the sur
-
face when cleaning.
10 Disposal
10.1 Product
This symbol must appear on any electrical and electronic equipment placed on the
EU market. This symbol indicates that this device should not be disposed of as
unsorted municipal waste at the end of its service life.
Owners of WEEE shall dispose of it separately from unsorted municipal waste.
Spent batteries and accumulators, which are not enclosed by the WEEE, as well
as lamps that can be removed from the WEEE in a non-destructive manner, must
be removed by end users from the WEEE in a non-destructive manner before it is
handed over to a collection point.
Distributors of electrical and electronic equipment are legally obliged to provide free take-back
of waste. Conrad provides the following return options free of charge (more details on our
website):
in our Conrad offices
at the Conrad collection points
at the collection points of public waste management authorities or the collection points set
up by manufacturers or distributors within the meaning of the ElektroG
End users are responsible for deleting personal data from the WEEE to be disposed of.
It should be noted that different obligations about the return or recycling of WEEE may apply in
countries outside of Germany
11 Technical data
Item no. 2436041
Ports .................................5x RJ-45 auto-MDI / MDI-X
Specifications
...................Bandwidth: 2 Gbit/s
..........................................
Buffer packet memory: 1 Mbit
..........................................
Forwarding rate: 148809 pps/port
..........................................
MAC address table: 2 K
Installation ........................DIN rail
Max. frame size
................
1522 bytes packet size
Flow control ......................Back pressure for half duplex
..........................................
IEEE 802.3x pause frame for full duplex
Housing ............................IP40 metal housing
LED status indicator .........Power: Red
..........................................
Ethernet: Yellow
Operating voltage .............12 - 52 V/DC (Redundant dual)
Power consumption ..........3 Watts
Surge protection ...............ESD (Ethernet): 8 KV/DC
..........................................
Surge (power supply): 2 KV/DC
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in
electronic data processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited.
This publication represent the technical status at the time of printing.
Copyright 2022 by Conrad Electronic SE.
*2436041_42_V3_0722_02_m_VTP_EN
