User Manual
SB-SLIM-44P
Contents:
(1) Soundbar
(1) Cloth-Wrapped Grill
(1) Wall Mount Bar
(2) Wall Mount Blocks with leveling screws
(8) Rubber Pads
(1) TruAudio Logo Badge
Description
The SB-SLIM-44P soundbar was designed to work great
with most flat or curved screen TV’s. Our patent-pending
wire pass-through design makes terminating the soundbar
a breeze. The thin-profile aluminum enclosure not only
provides the soundbar with a luxurious look and feel, but
also guarantees its durability. Because of the 3-channel
design they are perfect for a discrete 5.1 system. The
SB-SLIM-44P offers a modern design and innovative
mounting features.
Installation
The soundbar can be mounted using the included wall
mount bracket, or mounted directly to the TV using the
optional SB-CUSTOM-TVB mounting bracket.
Using the (included) Wall Mount
Mount the wall mount bar to the wall using appropriate
screws. Make sure the bar is installed level with the TV.
When installed, the top of the soundbar will sit
approximately 3/8” (10mm) higher than the top edge of the
wall mount bar. The bottom of the soundbar will be
approximately 5.75” (146mm) below the top edge of the
wall mount bar.
Place one wall mount block on either side of the bar,
making sure the set screw is centered in the block prior to
placing it on the bar. Each block should be placed in the
recess just to the outside of the mounting screw for that
side of the bar. The soundbar will rest on these blocks
when installed and a wider placement gives the soundbar
more stability. Placing the blocks too far from the
mounting screws may allow the bar to bend.
Place the soundbar on the wall mount, taking care to not
disturb the wall mount blocks. It may be necessary to level
the soundbar slightly if mounted very close to the TV. If so,
remove the soundbar from the mount and adjust the set
screws in the blocks. Screwing the set screw further into
the block will raise that side of the soundbar slightly.
slightly. You should only
adjust the set screw a
maximum of 1/16” (1.5mm),
and should never unscrew
the set screw, as that could
make the soundbar unstable
on the mount.
Wall Mount Block
Set Screw
Wall Mount Block
Mounting Screw
Wall Mount Block
Wall Mount Bar
Mounting Screw
