manualshive.com logo in svg

TRS ON-E kids 2020, User Manual, Page: 11 / 32

Share
Download
TRS ON-E kids 2020 User Manual Download Page 11

11

                       

SUMMARY

9. BATTERIES:

 

Our motorcycles are equipped with lithium-ion batteries. The loca

-

tion of the battery on the motorcycle protects it from possible shocks and gives it 
the necessary tightness. Review this manual to find more specific information on 
this aspect.

10. READ THIS MANUAL: 

Read completely this manual to know the characteris

-

tics and partricularities of an electric motorcycle. If any doubt can not be solved with
this manual, please contact with your local TRS distributor. Your closest distributor
can be consulted on 

www.trsmotorcycles.com

.

 

1. SUPERVISION: 

A responsible adult must supervise at all time.

2. WEAR A HELMET & SAFETY GEAR: 

The rider must wear a helmet & appropriate 

safety gear every time.

3. NO PASSENGERS: 

It is totally forbidden to carry passengers.

4. DO NOT EXCEED THE WEIGHT LIMITATIONS OF THE MACHINE.

5. CONDITIONS OF USE: 

OFF-ROAD

6. VISIBILITY CONDITIONS

7. ADVERSE WEATHER CONDITIONS: 

 The terrain may vary, so be responsible.

8. PLEASE MAINTAIN YOUR BIKE.

9. CARE FOR YOUR BATTERIES

10. READ, STUDY AND UNDERSTAND THIS ENTIRE MANUAL.

11. 

If you don’t understand any aspect of the use and care of your bike, please call TRS  

costumer service.

Summary of Contents for ON-E kids 2020

































Reviews:

No comments