FITTING INSTRUCTIONS:
EN
1.
Check that both the upper and lower leg straps
are open and identify finger tabs at top of support.
Using finger tabs, firmly grip support on both sides
and pull support up leg.
2.
Pull support up until centered over knee. Check
position of knee cap to be centered at front to
identify correct support height and alignment. It's
important for support not to be off center to either
side.
3.
Establish desired closure tension on top strap
and pull strap across front of support to secure
Velcro
®
. Compression of strap should be snug,
but not uncomfortable (do not inhibit circulation).
4.
Establish desired closure tension on bottom
strap and pull strap across front of support to
secure Velcro
®
. Compression of strap should be
snug, but not uncomfortable (do not inhibit
circulation).
