A
A`
B
B`
Install the wing to the fuselage
with 6x50mm screws as shown
in the diagrams below.
Drill 6.2mm holes at the place
of main wing.
A=A`
B=B`
TP Screw (2.3x12mm)
Wooden block
Retracts strut
LockNut (4mm)
Note:rubber wheels oleo struts
and retracts are optional.
Bushing (8X4mm)
Rib template (2mm ply)
3mm
TP Screw (2.3x12mm)
1.5mm
Rod (2x300mm)
Clevis
Washer(3x15mm)
Washer
Lock Nut (3mm )
Screw (3x35mm)
5mm
Clevis
Retainer
Rod (2x300mm)
Screw (2x10mm)
Screw (2x10mm)
2
Wood dowel (6x50mm)
2
Wood dowel (6x30mm)
2
Metal wire (5x30mm)
Main wing joiner
1
1
Bushing (8X4mm)
Reinforcement Plate
1
2
2
Blind Nut (6mm)
Screw (6x50mm)
4
Wooden Block(25x15x13mm)
1
Gear door
2
2
Wheel (100mm)
4
Screw (3x10mm)
8
TP Screw (2.3x12mm)
LockNut (4mm)
2
2
Wooden Block(15x15x3mm)
Install the nylon control horn and connect the linkage.
Secure the servo.Install the nylon control horn and
connect the linkage.
The standard sketch map will be as below when the
main wing install completion.
Assemble the wheel and the gear door to the retract.
Cut away the surplus parts of plastic cover
carefully along the shaded line.
PVC part
2
11
14
12
13
15
3
Apply anaerobic adhesiue.
AA
304
Accessory list for the coming installation steps.
Tail wheel
Washer(3x15mm)
Screw (3x80mm)
Lock Nut (3mm )
Clevis
Aluminum tube
Steel wire
3mm
2
Plastic tube(3x50mm)
120mm
40mm
Retainer
8
TP Screw (2.3x8mm)
Ply (15x15x3mm)
8
TP Screw (2.3x8mm)
90mm
Tail wheel
1.8mm
40mm
The sketch map when tail wheel assemble completion.
The sketch map of assembling the wheel steeling
mount to appropriate position in the fuselage.
Drill holes to appropriate position in the tail fuselage and
rudder for connecting the rudder and rudder servo.
TP Screw(3x20mm)
Washer (3x6mm)
4
4
Ply (6mm)
1
Ply (6mm)
The sketeh map of the linkages on the rudder shaft.
Assemble the tail wheel cover with screw.
The sketch map of the linkages on the tail wheel and
in the fuselage.
49
51
50
52
54
53
10
