![background image](http://html1.mh-extra.com/html/troy-bilt/straight-shaft-trimmer/straight-shaft-trimmer_operators-manual_1173497012.webp)
TROUBLESHOOTING
CAUSE
ACTION
Oil, cleaner, or lubricant in cutting head
Clean and thoroughly dry the cutting head
If further assistance is required, contact your authorized service dealer.
CAUSE
ACTION
Cutting head bound with grass
Stop the unit and clean cutting attachment
Cutting head out of line
Refill with new line
Inner reel bound up
Replace the inner reel
Cutting head dirty
Clean inner reel and outer spool
Line welded
Disassemble, remove the welded section
and rewind the line
Line twisted when refilled
Disassemble and rewind the line
Not enough line is exposed
Push the bump knob and pull out line until
4 inches (102 mm) of line is outside of the
cutting attachment
CUTTING HEAD WILL NOT ADVANCE LINE
CUTTING LINE ADVANCES UNCONTROLLABLY
12
Summary of Contents for Straight Shaft Trimmer
