ATTACH SWEEP CULTIVATOR TO
TOW HITCH
As previously mentioned, the Sweep Cultivator
connects to the Tow Hitch Attachment on the Power
Unit. Attach the Sweep Cultivator to the Tow Hitch as
follows:
Step 1:
Fit the C-shaped mounting bracket over the
top and bottom of the Tow Hitch and align the holes in
the hitch with those in the mounting bracket. See
Photo 8.
B.
Slip a 7/16" lockwasher and then a 7/16" hex nut
onto each of the plow bolts. Using an 11/16" socket
wrench or an adjustable wrench, tighten bolts
alternately until both are secure. See Photo 6.
Step 2:
Insert the two hitch pins through the outer
holes in the bracket and Tow Hitch. Placing both pins
in the outside holes keeps the Sweep straight. See
Photo 9.
C.
Check carefully to make sure that all hardware is
secure. When fully assembled, your Sweep Cultivator
should look like the one in Photo 7.
Photo 7
Photo 9
Photo 8
Photo 5
Photo 6
