778-13409
© 2015 23AADAAA
To remove a spray nozzle, simply
pull back on the spray gun collar (A)
and remove nozzle (B).
Install the
desired spray
nozzle into
the end of the
spray handle
assembly.
Simply align the tip into
the end of the spray
handle and push. It will
click into place.
Select the tip to use for the particular
application this pressure washer is to
be used for.
From the factory, the unit’s pressure control valve has been
set at maximum pressure. To lower pressure, rotate knob
counter-clockwise.
If planning to utilize “Soap” tip, follow these steps:
Remove plastic cap on soap inlet port of pressure
washer pump. Refer to Step 1.
Install the
bottle of soap
into the soap
holding tray
and insert the
soap inlet tube
into the bottle.
Soap bottle
NOT included.
Attach the nozzle extension
to spray gun by threading it
into the spray gun handle.
Firmly hand-tighten the two
components together.
Soap Inlet Tube
Soap Bottle
(Not included)
Soap Retaining Tray
Note:
See Operation
Section in manual for more
details regarding each
spray nozzle’s usage.
A
B
Install two plastic hose
clips packed with soap
inlet tube, into frame
holes provided.
Push soap inlet tube onto
inlet port on pressure
washer pump. Refer to
Step 1 for location of
where inlet tube attaches.
Route soap inlet tube
through two clips
installed in Step 2. See
inset.
WARNING!
When the FLEX™ Pressure Washer attachment is
attached to the FLEX™ Power Base, the engine must only be started
after the water supply is connected and turned on with water flowing
through the pressure washer. Failure to have the water source
connected with water flowing through he pressure washer prior to
starting the engine of the FLEX™ Power Base will cause irreparable
damage to the pressure washer pump.
Note:
Only the soap spray nozzle tip (black) is to
be used for dispensing liquid soap detergent.
5
8
6
9
7
10
READ AND UNDERSTAND ALL INSTRUCTION, WARNING, AND DANGER LABELS.
PARA INSTRUCCIONES EN ESPAÑOL, REFIÉRASE AL MANUAL DEL OPERADOR.
IMPORTANT: READ OPERATOR'S MANUAL AND ENGINE MANUAL THOROUGHLY
AND FOLLOW THE IMPORTANT SAFE OPERATION PRACTICES BEFORE OPERATING .
Need Help? Call 1-888-TO-HELP-U
