background image

2

TABLE OF CONTENTS

Content

Page

Important Safe Operation Practices .................................................................................. 3

Assembling Your

 

Snow Thrower ....................................................................................... 5

Know Your Snow Thrower................................................................................................. 6

Operating Your Snow Thrower .......................................................................................... 7

Making Adjustments .......................................................................................................... 8

Maintaining Your Snow Thrower ....................................................................................... 9

Off-Season Storage .......................................................................................................... 10

Troubleshooting ................................................................................................................ 11

Parts List .......................................................................................................................... 12

FINDING MODEL NUMBER

This Operator’s Manual is an important part of your new snow thrower. It will help you to assemble, prepare and 
maintain the unit for best performance. Please read and understand what it says. 

Before you start assembling your new snow thrower, please locate the model plate on the 
equipment and copy the information from it in the space provided below. The information on the 
model plate is very important if you need help from our Customer Support Department or an 
authorized dealer. 

You can locate the model number by standing behind the unit in the operating position and

 

looking down at 

the dash panel . A sample model plate is explained below. For future reference, please copy the model 
number and the serial number of the equipment in the space below.

ENGINE INFORMATION

The engine manufacturer is responsible for all engine-related issues with regards to performance, power-rating, 
specifications, warranty and service. Please refer to the engine manufacturer’s Owner’s/Operator’s Manual packed 
separately with your unit for more information.

CALLING CUSTOMER SUPPORT

Please do NOT return the unit to the retailer from which it was purchased, without first contacting Customer Support.

If you have difficulty assembling this product or have any questions regarding the controls, operation or 
maintenance of this unit, please call 1-866-840-6483 or 1-330-558-7220 to reach a Customer Support 
representative. Please have your unit’s model number and serial number ready when you call. See 
previous section to locate this information. You will be asked to enter the serial number in order to 
process your call.

Copy the model number here:

Copy the serial number here:

www.troybilt.com

TROY-BILT  LLC
P. O. BOX    3 6 1 1 3 1
CLEVELAND, OH 44136

866-840-6483

330-558-7220

Model Number ________________

Serial Number ________________

Summary of Contents for 721

















Reviews: