Troxler Enhanced RoadReader Plus 3451, Manual Of Operation And Instruction

Page: 75 / 247

4–12
✓
While the gauge is taking a measurement, the PDA displays the
time remaining.
✓
After the count time, the gauge collects the count information
and GPS data, and then transmits this data to the PDA.
✓
The PDA displays the prompt
Would you like to add
project notes?
This enables the operator to enter project
notes to be stored with the measurement results.

To continue without entering project notes, press
〈
No
〉
.

To add project notes, press
〈
Yes
〉
. The PDA displays the
Project Notes screen shown in Figure 4–7. Enter the
desired notes and press
〈
Ok
〉
. Troxler recommends that the
information entered as project notes does not exceed 40
characters.
✓
The PDA displays the measurement results as shown in Figure
4–8. Note that the
Fix Quality is displayed as GPS fix . This
indicates that the gauge’s GPS receiver was able to determine a
GPS location, but the Wide Area Augmentation System
(WAAS) was not available. For more information on GPS
accuracy, refer to page 1–5. Press the
〈
ok
〉
button to continue.
Figure 4–7. Entering Project Notes