Troxler Enhanced RoadReader Plus 3451, Manual Of Operation And Instruction

Page: 55 / 247

3–20
The Wizard is a series of screens that provides step-by-step
instructions for setting up a new project. Using the wizard, the
operator is prompted to:
✓
Select the measurement mode ( Soil , Asphalt , or Thin Layer ).
For more information, refer to page 5–5.
✓
Select the desired measurement units. For more information on
measurement units, refer to page 5–4.
✓
Set the count time. For more information, see page 5–6.
✓
For thin layer mode, enter the thickness of the top layer.
✓
Enable any previously entered target values. For more
information on target values, see page 5–14.
The
Wizard
displays the operator selections for review. To change
a setting, press the
〈
Back
〉
button to return to the page for that
function or press the
〈
Cancel
〉
button to start over. When all
settings are correct, press the
〈
Next
〉
button to continue.
Figure 3–12. Project Menu
Figure 3–13. New Project
Setup Wizard, Page 1