Troxler 4640-B, Operation And Instruction Manual

Page: 44 / 140

CREATING A PROJECT
The
Project function allows the user to create, retrieve, view, and/or
erase projects. Data is stored in the 4640-B under a project number .
If the user presses the
〈
STORE
〉
key after a reading is taken (see
page 4–3), the reading will be stored in the gauge memory under the
active project number.
Press
〈
SHIFT
〉
and
〈
PROJECT
〉
for the display:
Current Project:
xxxxxxx
Do you want a
new Project #?
From this screen projects can be created (press
〈
YES
〉
) or viewed
and/or erased (press
〈
NO/CE
〉
).
CREATE A NEW PROJECT
Input the number of a new project. The project will be active until a
new project number is entered. All gauge readings that are stored
will be stored under the new project.
VIEW/ERASE PROJECT
PR# xxxxx
1- View Proj.
2- Erase Proj.
3- Next Proj.
Scroll through the project numbers by pressing
〈
3
〉
. When the
desired project number is displayed, the user may either view the
project data (press
〈
1
〉
) or erase the project from the gauge memory
(press
〈
2
〉
.). After making the selection to either view or erase,
follow all instructions on the gauge display.
4–2