Fig. 25: Fixing the weather hood with screws
2.
Screw the weather hood to the frame using M6x12
pan head screws.
Fitting base frame plugs
Fig. 26: Fitting plugs
Seal the transport openings in the base frame of
the air handling unit with the plugs (Fig. 26/1) pro-
vided.
Fixing cover strips to the intermediate frame
Fig. 27: Cover strip coding
1.
NOTICE!
Risk of water damage from incorrect
assembly!
If units with an intermediate frame are installed
outdoors, missing cover strips or incorrect
assembly may lead to the ingress of water.
To prevent the ingress of water into the inter-
mediate frame and hence into the unit, seal the
intermediate frame with cover strips.
Fix the cover strips immediately after the
assembly steps described above. If you do not
fix the cover strips immediately, water may get
into the unit and damage the components.
Each cover strip carries a code indicating its posi-
tion (see table).
No. of the
inter-
mediate
frame
Side code
Number
(left
→
right)
01 ... 99
V
Front = oper-
ating side
1.1 ... 9.1
H
Rear
L
Left
R
Right
Setup and assembly
Setting up and assembling the air handling unit > Additional assembly steps for outdoor un...
Air handling unit X-CUBE
37
