Using eye nuts
Personnel:
Crane driver
Protective equipment:
Industrial safety helmet
Protective clothing
Protective gloves
Safety shoes
WARNING!
Danger of death from the fall of AHU casing
units.
If you overload lashing points or lifting gear, the load
may fall down. You or others could be killed.
–
Use eye nuts only to move AHU casing units up
to a maximum weight of 1000 kg.
–
Use all the lashing points provided.
–
Use only adequate lifting gear and slings.
–
Stand clear of suspended loads.
Fig. 7: Using eye nuts for moving units with a crane
AHU casing unit maximum weight: 1000 kg
Ⓐ
Moving units with ropes/chains
Ⓑ
Moving units with a lifting beam
①
Eye nut
②
Slings
1.
AHU casing units with a roof are factory fitted
with eye nuts.
Hook the slings (Fig. 7/2) into the eye nuts.
Note:
Maintain an angle greater than 45° between
the sling and the top of the unit.
Do not spread slings by more than 60°.
Ensure that the slings cannot damage the
AHU casing unit.
Suspend (distribute) the load symmetrically,
i.e. in such a way that its centre of gravity is
beneath the crane hook.
We recommend using a chain hoist and lifting
beam in the following cases:
–
If the correct angles for the slings cannot
be maintained.
–
If there are more than four lashing points
on a package.
2.
Slowly lift the load and start moving.
Transport and storage
Moving packages > Moving packages with a crane
Air handling unit X-CUBE
14
