background image

Product overview

Fig. 1: Chilled ceiling WK-D-WF, example

1

Specially formed blade

2

Pipe (serpentine)

3

Fixing bracket

Important notes

Information on the installation manual

This manual enables operating or service personnel
to correctly install the product described below and
to use it safely and efficiently.

It is essential that these individuals read and fully
understand this manual before starting any work.
The basic prerequisite for safe working is to comply
with the safety notes and all instructions in this
manual.

The local regulations for health and safety at work
and general safety regulations also apply.

Safety

Correct use

Cooling panels are primarily used for the cooling of
internal spaces; they use water to dissipate thermal
loads.

They can, however, be combined with a ventilation
system and be used for heating.

Incorrect use

 WARNING!

Danger of injury or risk of damage to property
due to incorrect use!

Incorrect use of the cooling panels can lead to
dangerous situations.

Do not use cooling panels:

in areas with potentially explosive atmos-
pheres

outdoors

in humid rooms

in rooms with aggressive or dust-laden air

at temperatures below the dew point

Modifying the unit or using replacement parts that
have not been approved by TROX is not permitted.

Staff

Qualification

The work described in this manual has to be carried
out by individuals with the qualification, training,
knowledge and experience described below:

Drywall installer

Drywall installers build indoor and outdoor drywall
(also called plasterboard) constructions, e.g. light-
weight partition walls, that meet the requirements
for thermal insulation, noise insulation, fire protec-
tion and protection from radiation. They also fit clad-
ding to walls and ceilings, for example plasterboard,
metal panels or wood, and insert the necessary
insulation.

Installation manual

GB/en

Chilled ceiling

WK-D-WF

TROX GmbH

Heinrich-Trox-Platz
47504 Neukirchen-Vluyn, Ger-
many
Germany
Phone: +49 (0) 2845 2020
+49 (0) 2845 202-265
E-mail: [email protected]
http://www.troxtechnik.com

A00000087742, 03/2022, 

©

 2021 TROX GmbH

Chilled ceiling WK-D-WF

1

Summary of Contents for WK-D-WF











Reviews: