Rego-T
2
APPLICATION
Rego-T is a user-friendly commissioning damper with an extremely
low noise level. The unit is intended for manual operation only, and
correct installation according to air flow is crucial. NB! Actuator-
controlled operation is not possible. Max operating temperature for
the damper is 100°C.
DESIGN
Rego-T is available in 3 different designs.
1. Height (H) = 50, 75, 100 and 150mm with one damper-blade only.
NB! For installation in duct with internal insulation,
dimensions must be taken into consideration for the 150mm
unit as the damper blade protrudes from the damper frame.
2. Standard design with damper blades moving in opposite
directions as shown in fig. 1. 50mm module.
3. Standard design with circular spigot available in dim. from and incl.
Ø400 to and incl. Ø1250, shown as D in fig. 2.
Shut-off level is max 90%. The damper lever is equipped with
a graduated scale, and can be locked in position with 2
thumbscrews. Damper blades are pinion operated. Rego-T is
available in other materials and/or dimensions on request.
MATERIALS AND SURFACE COATING
Frame profiles and damper blades are supplied in a galvanised steel
finish, pinion in PBT plastic.
Rego-T in dimensions Ø400, Ø500 and Ø630, featuring circular con-
nection collars, are fitted with EPDM rubber gaskets.
DIMENSIONS AND WEIGHT, Rego-T
Min. width: 200mm. Max width: 1400mm.
Module: 50mm
Min. height: 50mm. Max height: 1400mm. Module: 50mm
Weight in kg = damper area in m² x factor 20.
ORDER CODE, Rego-T
BESTILLINGSKODE, Rego-T
Rego-T - 1200 - 800 / 0 - 0
Product
B = Width
H = Height
Example:
Rego-T 1200-800 / 0-0
Explanation:
Rego-T, rectangular damper, 1200 width and 800 height
SM = Special material
SA = Circular connection,
Ø400 - Ø1250
Fig. 2, Rego-T,
with circular spigot
Fig. 1, Rego-T.
