Fig. 7: Diffuser face AIRNAMIC-Q
AIRNAMIC-Q
NS
□Q
₂
□Q
₁
Aeff
m²
Q/300L
262
298
0.0139
Q/300H
262
298
0.0175
Q/600
539
598
0.0616
Q/625
539
623
0.0616
Fig. 8: Diffuser face AIRNAMIC-R
AIRNAMIC-R
NS
ØD1
ØD2
Aeff
m²
R/160
160
132
0.0036
R/250
250
210
0.0098
NS
ØD1
ØD2
Aeff
m²
R/400L
400
352
0.0186
R/400H
400
352
0.0258
R/600
600
546
0.0504
Installation
General information
Personnel:
Specialist personnel
Protective equipment:
Industrial safety helmet
Protective gloves
Safety shoes
Installation notes:
Fix the device only to load-bearing structural
elements.
Load suspension systems only with the weight
of the device. Adjacent components and con-
necting ducts must be supported separately.
Use only approved and adequately sized fixing
material (fixing material is not included in the
supply package).
Refer to the technical leaflets for product
weights and dimensions.
The air terminal devices must remain acces-
sible for cleaning even after installation.
Installation and sealing material which the
manufacturer provides is usually supplied in an
extra bag.
Before you install the device, take suitable precau-
tions to protect air distribution components from
contamination during installation (VDI 6022). If this
is not possible, at least cover the devices or take
other precautions to protect them from contamina-
tion. In this case you have to ensure that the
devices cannot be activated. Ensure that all compo-
nents are clean before you install them. If neces-
sary, clean them thoroughly. If you have to interrupt
the installation procedure, protect all openings from
the ingress of dust or moisture.
Installation
Air terminal devices AIRNAMIC
6
