EN
5
tower fan TVE 29 T
Connecting the fan body and foot
1. Remove the plastic nut (4) underneath the fan body.
2. Connect the assembled foot with the fan body.
3. Tighten the plastic nut (4) at the bottom side of the fan
body.
4
Start-up
When positioning the device, observe the minimum distance
from walls or other objects as described in the Technical data
chapter.
A
B
D
C
C
•
Before restarting the device, check the condition of the
power cable. If there are doubts as to the sound condition,
contact the customer service.
•
Set the device up in an upright and stable position.
•
Do not create tripping hazards when laying the power
cable or other electric cables, especially when positioning
the device in the middle of the room. Use cable bridges.
•
Make sure that extension cables are completely unrolled.
•
Make sure that no curtains or other objects interfere with
the air flow.
Connecting the power cable
•
Insert the mains plug into a properly secured mains
socket.
Operation
Operating elements
6
5
7
8
No.
Designation
Meaning
5
OFF
position
Switching the device off
6
Rotary switch
• Switching the device on and off
7
Fan stage
position • Setting the fan stage (1-3)
stage 1 = low fan speed
stage 2 = medium fan speed
stage 3 = high fan speed
8
SWING
position
• Activating and deactivating the fan
stage (1–3) with additional oscillation
function
stage 1: low fan speed with
oscillation function
stage 2: medium fan speed with
oscillation function
stage 3: high fan speed with
oscillation function
