background image

EN

7

axial fan TTV 4500 / TTV 4500 HP / TTV 7000

Operation

Operating elements

TTV 4500 / TTV 4500 HP / TTV 7000

3

2

1

0

9

10

No.

Designation

Meaning

9

Fan stage

 

selection switch
1
2
3

Setting the fan speed:

stage 1 = low
stage 2 = medium
stage 3 = high

10

Stage 0

Device switched off

Switching the device on

ü

The device has been completely installed as described in
the Assembly and start-up chapter.

1. Switch the device on by turning the 

fan stage

 selection

switch (9) to the desired position.

Shutdown

Warning of electrical voltage

Do not touch the mains plug with wet or damp hands.

1. Switch the device off by turning the 

fan stage

 selection

switch (9) to the 0 position.

2. Hold onto the mains plug while pulling the power cable out

of the socket.

3. Clean the device according to the Maintenance chapter.
4. Store the device according to the Storage chapter.

Available accessories

Warning

Only use accessories and additional equipment
specified in the instructions.
Using insertion tools or accessories other than those
specified in the instructions may cause a risk of injury.

TTV 4500 / TTV 4500 HP

Designation

Article number

Hose adapter

6.100.005.010

Combination distributor

6.100.005.011

Dust bag class M, length: 3 m

7.160.000.110

Dust bag class M, length: 5 m

7.160.000.112

Air transport hose Tronect SP-T, 
length: 7.6 m

6.100.001.214

Air transport hose Tronect TF-L, 
length: 5 m

6.100.001.115

Universal lashing strap

6.100.001.995

TTV 7000

Designation

Article number

Hose adapter

6.100.005.020

Dust bag class M, length: 5 m

7.160.000.112

Air transport hose Tronect SP-T,
length: 7.6 m

6.100.001.217

Universal lashing strap

6.100.001.995

Errors and faults

The device has been checked for proper functioning several
times during production. If malfunctions occur nonetheless,
check the device according to the following list.

The fan is not running:

Check whether the device is switched on.

Check the power connection.

Check the power cable and mains plug for damages.

Check the on-site fusing.

The fan operates only for a brief period, then switches off:

Check whether the protective grid at the air inlet is
obstructed in some way. If applicable, remove foreign
objects.

The motor bearing might be damaged. Please contact the
customer service.

The motor or fan is noisy or runs unevenly:

The fan is soiled. Clean the fan according to the
Maintenance chapter.

Summary of Contents for TTV 4500














Reviews: