EN
7
electric heater TEH 70 / TEH 100
•
Before restarting the device, check the condition of the
power cable. If there are doubts as to the sound condition,
contact the customer service.
•
The device may only be used in environments with no
excessive formation of dust.
•
Set the device up in an upright and stable position.
•
Lock the wheels and secure the device against rolling
away.
•
Do not create tripping hazards when laying the power
cable or other electric cables, especially when positioning
the device in the middle of the room. Use cable bridges.
•
Make sure that extension cables are completely unrolled.
•
Make sure that no curtains or other objects interfere with
the air flow.
•
Make sure that the device cannot come into contact with
moisture or water.
Connecting the power cable
•
Insert the mains plug into a properly secured mains power
socket.
•
Make sure that the power cable is guided along the back
of the device. Never guide the power cable along the front
of the device!
Operation
•
Avoid open doors and windows.
•
Stackable: up to 3 devices may be stacked on top of one
another.
Control panel
7
9
10
11
12
13
No.
Designation
Meaning
7
Rotary switch
temperature
Switching the device on/off
Setting the heating level
9
Position
0
The device is switched off.
10
Position
1
Aeration (no temperature increase)
11
Position
2
Heating level 1
12
Position
3
Heating level 2
13
Position
4
Heating level 3
Switching the device on
Once you have completely installed the device as described in
the Start-up chapter, you can switch it on.
1. Set the rotary switch
temperature
(7) into the desired
position switch the device on.
Switching the device off
1. Set the rotary switch
temperature
(7) to
1
(10) where
ventilation mode only is activated.
2. Keep the fan running until the device has cooled down.
The fan motor stops automatically.
ð
Never pull the mains plug from the socket while the
fan is running. The device may overheat.
3. Set the switch
temperature
(7) to
0
(9) to switch the device
off.
