6
EN
convector TCH 1500 E
Start-up
Info
Odours might arise upon initial start-up or after a
longer period of non-use.
When positioning the device, observe the minimum distance
from walls or other objects as described in the Technical data
chapter.
A
B
C
C
D
•
Before restarting the device, check the condition of the
power cable. If there are doubts as to the sound condition,
contact the customer service.
•
Set the device up in an upright and stable position.
•
Do not create tripping hazards when laying the power
cable or other electric cables, especially when positioning
the device in the middle of the room. Use cable bridges.
•
Make sure that extension cables are completely unrolled.
•
Make sure that no curtains or other objects interfere with
the air flow.
•
Do not position the device directly below a wall socket.
•
Make sure that the device cannot come into contact with
moisture or water.
Prior to initial start-up, insert batteries in the remote control.
Connecting the power cable
•
Insert the mains plug into a properly secured mains
socket.
•
Make sure that the power cable is guided along the back
of the device. Never guide the power cable along the front
of the device!
Operation
•
Avoid open doors and windows.
Control panel
10
15
11
12
13
14
Remote control
All settings of the device can also be made using the remote
control included in the scope of delivery.
13
11
12
16
10
15
14
No. Designation
Meaning
10
Increase value
button
For setting the desired room
temperature (5 °C to 35 °C) or the
number of hours for the timer
(1 to 24 h)
11
Timer
button
Automatic switch-on
timer function in
increments of 1 hour (1 h to 24 h)
Automatic switch-off
timer function in
increments of 1 hour (1 h to 24 h)
12
Eco
button
Energy-saving mode with a fixed
temperature setting of 26 °C
13
On/off
button
Switches the device on and off
(standby)
14
Heating level
button
Increases the heating level (1-10)
