4
EN
cordless work light PWLS 10 / PWLS 10-20V
Residual risks
Warning of electrical voltage
Electric shock from insufficient insulation.
Check the device for damages and proper functioning
before each use.
If you notice damages, no longer use the device.
Do not use the device when the device or your hands
are damp or wet!
Warning of electrical voltage
Work on the electrical components must only be
carried out by an authorised specialist company!
Warning of electrical voltage
Before any work on the device, remove the mains plug
from the mains socket and the battery from the device!
Hold onto the mains plug while pulling the power cable
out of the mains socket.
Warning of electrical voltage
There is a risk of a short-circuit due to liquids
penetrating the housing!
Do not immerse the device and the accessories in
water. Make sure that no water or other liquids can
enter the housing.
Warning of explosive substances
Do not expose the battery to temperatures above
45 °C! Do not let the battery come into contact with
water or fire! Avoid direct sunlight and moisture. There
is a risk of explosion!
Warning of hot surface
Some parts of this product can become very hot and
cause burns. Particular attention has to be given where
children and vulnerable people are present!
Warning
Dangers can occur at the device when it is used by
untrained people in an unprofessional or improper way!
Observe the personnel qualifications!
Warning
The device is not a toy and does not belong in the
hands of children.
Warning
Risk of suffocation!
Do not leave the packaging lying around. Children may
use it as a dangerous toy.
Caution
Keep a sufficient distance from heat sources.
Warning
Do not look directly into the LEDs! The optical radiation
can be harmful for your eyes.
Note
If you store or transport the device improperly, the
device may be damaged.
Note the information regarding transport and storage of
the device.
Warning
Technical defects can occur if the ambient
temperatures are not observed!
The device is only intended for indoor use.
Information about the device
Device description
The device
PWLS 10
/
PWLS 10-20V
is equipped with a light-
intense LED tube light with integrated inspection lamp. The
bright LED located inside the head also functions as torch. This
enables an illumination covering larger areas but also with pin-
point precision.
The LEDs have a luminous intensity of 110 lux (300 lm).
The lamp head can be rotated by 270° and vertically tilted into
7 lock-in positions by up to 180°, thus guaranteeing nearly
unlimited lighting positions.
The soft grip rubber inlays at the handle ensure a firm hold.
With the integrated suspension hook you can easily hang the
lamp up.
and the preassembled belt clip facilitates transport and provides
faster access to the device.
The battery comes with its own battery level indication. As a
result you can check the current charging status without having
to connect it to the device.
Info
The device
PWLS 10-20V
is supplied without battery
and quick charger as accessories. You may use Trotec
Multiflex batteries 20V 2 Ah / 4 Ah and the
corresponding quick charger with the device (see
chapter Available accessories).
