SpeedMarker 300 /
ProMarker 300
Ausgabe 1.0
Technische Änderungen vorbehalten.
TROTEC Produktions- u. Vertriebs GmbH
Linzer Straße 156, A
– 4600 Wels
Seite
6
von 42
General Instructions for Using the Operation manual
The Operation manual describes how to handle the device correctly and safely and guides you through the neces-
sary steps for initial use. The Operation manual also contains important information regarding system maintenance.
This Operation manual must be read and followed carefully before commissioning and operating the device. Failing
to observe individual points listed in this Operation manual may result in personal injury and/or material damage to
property!
This system may only be operated using devices and spare parts included in the scope of supply or the replacement
or wear and tear parts list.
Ancillary devices must be calibrated to meet the safety and operational requirements of the base machine (please
contact your dealer or the manufacturer with any queries).
The following symbols are used within this Operation manual to aid understanding:
If the Operation Manual is not observed, this area represents a particular danger for the operating
personnel or the personnel responsible for maintenance.
Caution:
This component is under voltage. In these areas strictly observe the safety instructions
regarding electricity. Care is to be taken in particular during maintenance and repair work.
Caution:
In this area pay attention to the possible dangers of the laser beam.
Note or information on individual components of the device, that simplify the use or make it more
understandable.
