6
EN
planer PPLS 10-750 / PPLS 10-800
Warning
Dangers can occur at the device when it is used by
untrained people in an unprofessional or improper way!
Observe the personnel qualifications!
Warning
The device is not a toy and does not belong in the
hands of children.
Warning
Risk of suffocation!
Do not leave the packaging lying around. Children may
use it as a dangerous toy.
Caution
Vibration emissions can cause a health hazard if the
device is used for an extended period of time or if it is
not properly handled and maintained.
Caution
Keep a sufficient distance from heat sources.
Note
If you store or transport the device improperly, the
device may be damaged.
Note the information regarding transport and storage of
the device.
Behaviour in the event of an emergency / emergency
stop function
Emergency stop:
Removing the mains plug from the mains socket results in the
function of the device immediately stopping. In order to secure
the device against accidental switch-on, leave the mains plug
disconnected.
Behaviour in the event of an emergency:
1. Switch the device off.
2. In an emergency, disconnect the device from the mains
feed-in: Hold onto the mains plug while pulling the power
cable out of the mains socket.
3. Do not reconnect a defective device to the mains.
Information about the device
Device description
The device
PPLS 10-750
or
PPLS 10-800
is an electrical planer
for processing wooden surfaces.
The device comes with an idle speed of 13,000 rpm
(
PPLS 10-750
) or an idle speed of 17,000 rpm (
PPLS 10-800
).
The cutting depth can be set at the rotary knob to up to
3 millimetres (
PPLS 10-750
) or up to 2.5 mm (
PPLS 10-800
).
The lift-off device, which folds out automatically, prevents
damage of the workpiece or blade when the device is put down.
The 3 V grooves are suited for chamfering edges.
Chip ejection is possible on the left or right as desired.
The device is equipped with a start lock preventing unintentional
switch-on of the device.
Info
The illustrations in these instructions feature the device
PPLS 10-750
by way of example. The represented
operating steps and explanations also apply to device
PPLS 10-800
unless otherwise mentioned.
