Trotec PJSS 13-230V Operating Instructions Manual Download Page 3

EN

3

850W pendulum action jigsaw PJSS 13-230V

The term 

power tool

 in the warnings refers to your mains-

operated (corded) power tool or battery-operated (cordless)
power tool.

General Power Tool Safety Warnings – Work area
safety

Keep work area clean and well lit.

 Clutter or dark areas

invite accidents.

Do not operate power tools in explosive atmosphere,
such as in the presence of flammable liquids, gases or
dust.

 Power tools create sparks which may ignite the dust

or fumes.

Keep children and bystanders away while operating a
power tool.

 Distractions can cause you to lose control.

General Power Tool Safety Warnings – Electrical
safety

Power tool plugs must match the outlet. Never modify
the plug in any way. Do not use any adapter plugs with
earthed (grounded) power tools.

 Unmodified plugs and

matching outlets will reduce risk of electric shock.

Avoid body contact with earthed or grounded surfaces,
such as pipes, radiators, ranges and refrigerators.

There is an increased risk of electric shock if your body is
earthed or grounded.

Do not expose power tools to rain or wet conditions.

Water entering a power tool will increase the risk of
electric shock.

Do not abuse the cord. Never use the cord for carrying,
pulling or unplugging the power tool. Keep cord away
from heat, oil, sharp edges or moving parts.

 Damaged

or entangled cords increase the risk of electric shock.

When operating a power tool outdoors, use an
extension cord suitable for outdoor use.

 Use of a cord

suitable for outdoor use reduces the risk of electric shock.

If operating a power tool in a damp location is
unavoidable, use a residual current device (RCD)
protected supply.

 Use of an RCD reduces the risk of

electric shock.

General Power Tool Safety Warnings – Personal
safety

Stay alert, watch what you are doing and use common
sense when operating a power tool. Do not use a
power tool while you are tired or under the influence of
drugs, alcohol or medication.

 A moment of inattention

while operating power tools may result in serious personal
injury.

Use personal protective equipment. Always
wear eye protection.

 Protective equipment such

as a dust mask, non-skid safety shoes, hard hat or
hearing protection used for appropriate conditions
will reduce personal injuries.

Prevent unintentional starting. Ensure the switch is in
the off-position before connecting to power source
and/or battery pack, picking up or carrying the tool.

Carrying power tools with your finger on the switch or
energising power tools that have the switch on invites
accidents.

Remove any adjusting key or wrench before turning
the power tool on.

 A wrench or a key left attached to a

rotating part of the power tool may result in personal
injury.

Do not overreach. Keep proper footing and balance at
all times.

 This enables better control of the power tool in

unexpected situation.

Dress properly. Do not wear loose clothing or
jewellery. Keep your hair and clothing away from
moving parts.

 Loose clothes, jewellery or long hair can be

caught in moving parts.

If devices are provided for the connection of dust
extraction and collection facilities, ensure these are
connected and properly used.

 Use of dust collection can

reduce dust-related hazards.

Do not let familiarity gained from frequent use of tools
allow you to become complacent and ignore tool
safety principles.

 A careless action can cause severe

injury within a fraction of a second.

General Power Tool Safety Warnings – Power tool
use and care

Do not force the power tool. Use the correct power tool
for your application.

 The correct power tool will do the

job better and safer at the rate for which it was designed.

Do not use the power tool if the switch does not turn it
on and off.

 Any power tool that cannot be controlled with

the switch is dangerous and must be repaired.

Disconnect the plug from the power source and/or
remove the battery pack, if detachable, from the power
tool before making any adjustments, changing
accessories, or storing power tools.

 Such preventive

safety measures reduce the risk of starting the power tool
accidentally.

Store idle power tools out of the reach of children and
do not allow persons unfamiliar with the power tool or
these instructions to operate the power tool.

 Power

tools are dangerous in the hands of untrained users.

Summary of Contents for PJSS 13-230V



















Reviews: