![Trotec PJSS 12-230V Original Instructions Manual Download Page 15](http://html1.mh-extra.com/html/trotec/pjss-12-230v/pjss-12-230v_original-instructions-manual_1172287015.webp)
EN
15
850W pendulum action jigsaw PJSS 12-230V
Switching the device on and off
Wear your personal protective equipment when working with
the device.
1. Check whether the fixed saw blade, the set stroke rate, the
pendulum action and the cutting angle are suitable for the
intended application.
2. Check whether the workpiece is secured and the worktop
prepared correspondingly.
3. Position the base plate with the sliding block (
6
) on the
workpiece.
4. Press the on/off switch (
2
) and hold it during operation.
19
2
6
5. Let go of the on-/off-switch (
2
) to stop the device.
Switching continuous operation on and off
Info
The device comes equipped with a restart protection.
In the event of a temporary power failure, the lock-on
switch of the on/off switch is automatically
deactivated. The on/off switch switches off and thus
prevents an unintentional restarting of the device. To
restart the device, the on/off switch must be actuated
again.
When continuous operation is activated, the on/off switch does
not have to be held permanently, which makes working more
comfortable.
1. Proceed as described in the chapter Switching the device
on and off, steps 1 to 4.
2. Push the lock-on switch (
19
) to the left or right with your
thumb until the lock-on switch is completely pushed in on
one side.
3. Let go of the on/off switch (
2
) and continue holding the
device.
ð
The device keeps running and continuous operation is
activated.
4. Press the on/off switch (
2
) to stop continuous operation.
ð
The lock-on switch (
19
) automatically returns to centre
position.
5. Let go of the on-/off-switch (
2
) to stop the device.
Setting the splinter blow-off/suction function
You can choose whether the splinters shall be blown off towards
the front or sucked off with an optionally connectable vacuum
cleaner.
1. Make sure that the protective cover (
16
) is mounted.
2. Slide the blow-off/suction function selector switch (
4
) to
the left to suck the splinters in using an external vacuum
cleaner, or to the right to blow the splinters away.
16
4