EN
16
belt sander PBSS 10-600
Emptying / cleaning the dust collector
The device accomplishes a high removal rate. For optimum
working conditions regularly empty and clean the dust collector.
1. Detach the dust collector (6) from the adapter
connection (4) by squeezing the clips (15) and
simultaneously pulling.
6
4
15
2. Tap the closed end of the dust collector (6) against a solid
surface to loosen the dust from the dust collector.
3. Empty the dust collector completely. Use a brush to
remove adherent abrasive dust.
4. Push the dust collector (6) back onto the adapter
connection (4). The dust collector (6) must click into place
at the device.
6
4
Disposal
The icon with the crossed-out waste bin on waste
electrical or electronic equipment stipulates that this equipment
must not be disposed of with the household waste at the end of
its life. You will find collection points for free return of waste
electrical and electronic equipment in your vicinity. The
addresses can be obtained from your municipality or local
administration. For further return options provided by us please
refer to our website www.trotec24.com.
The separate collection of waste electrical and electronic
equipment aims to enable the re-use, recycling and other forms
of recovery of waste equipment as well as to prevent negative
effects for the environment and human health caused by the
disposal of hazardous substances potentially contained in the
equipment.
