EN
6
Operating manual – air cooler PAE 25
2. Fill the water tank (8) with fresh drinking water only.
Optionally, you can add ice cubes made of drinking water
for additional cooling.
ð
Observe the minimum (13) and maximum filling
level (12) at the filling level indicator.
The water tank must be filled up to minimum filling
level (13) to enable pump operation.
12
13
3. If required, put the two ice packs into the compartment
inside the water tank to achieve an enhanced cooling effect.
4. Refit the water tank into the device.
5. Make sure that the device is neither damp nor wet on the
outside. Otherwise wipe it dry.
Inserting the honeycomb filter
Notice
When set to air cooling mode, the device should not be
operated without the honeycomb filter, otherwise
cooling
will not work.
•
Make sure that the honeycomb filter is installed before
switching the device on.
Opening the ventilation flaps
Prior to switching the device on, open the two segments of the
ventilation flaps at the air outlet.
Connecting the power cable
•
Insert the mains plug into a properly secured mains
socket.
•
The symbols on the control panel display light up briefly.
The device is now in standby mode.
Summary of Contents for PAE 25
Page 1: ...TRT BA PAE25 TC 002 EN PAE 25 EN OPERATING MANUAL AIR COOLER...
Page 17: ......
