manualshive.com logo in svg

Trotec IRD 1200, Operating Manua

Share
Download
Trotec IRD 1200 Operating Manua Download Page 11

EN

11

infrared radiant heater IRD 1200 / IRD 1800 / IRD 2400 / IRD 3200

Operation

Info

The device will only emit heat if the settings are made
via the remote control.

Display

            

20

21

19

No. Designation

Meaning

19 Operating light

Flashes red when the device has been
switched on via the on/off switch.
Is permanently illuminated in red when
the device has been switched on via the
remote control.

20 Timer LED

Is permanently illuminated in green
when the timer is active.

21 Segment display Heating level indication:

P0 = device in standby mode
P1 = level 1
P2 = level 2
P3 = level 3
Indication of the number of hours during
timer programming

Info

An acoustic signal is emitted each time a setting is
activated.

Info

If you switch off the device via the remote control, the
device will be set to standby mode. If standby
operation is not required, you can switch the device off
via the on/off switch (2).

Remote control

The device settings can only be made using the remote control
included in the scope of delivery.
Therefore, keep the remote control in a safe place, otherwise
the device can no longer be operated. Should you still be unable
to find the remote control, you can reorder a new one from
Trotec.

TIMER

P3

P2

P1

22

23

27

26

24

25

No. Designation

Meaning

22 Transmitter

Sends signals to the device.

23 Power button

Switching the device on and off

24

P2

 button

Selecting heating capacity level 2

25

TIMER

 button

Timer function
Automatic switch-off in increments of
1 hour up to 24 hours

26

P3

 button

Selecting heating capacity level 3

27

P1

 button

Selecting heating capacity level 1

The heating capacity in the individual heating levels is 33 %
(level 1), 66 % (level 2) and 100 % (level 3):

Heating
capacity

IRD 1200 IRD 1800 IRD 2400 IRD 3200

P1 = level 1

400 W

600 W

800 W

1070 W

P2 = level 2

800 W

1200 W

1600 W

2140 W

P3 = level 3

1200 W

1800 W

2400 W

3200 W

Info

If you switch off the device via the remote control, the
device will be set to standby mode. If standby
operation is not required, you can switch the device off
via the on/off switch (2).

Summary of Contents for IRD 1200

















Reviews:

No comments

Brands by name

Popular brands

Load more brands