EN
5
Fog and flue gas simulator FS 200
Technical data
Parameter
Value
Model
FS 200
Weight without fluid
14 kg
Dimensions
(height x width x depth)
465 x 253 x 310 mm
Evaporator power
1,500 W
Fan turbine power
1,600 W
Power consumption, max.
3,100 W
Supply voltage
230 V / 50 Hz
Type of protection
IP 54
Air flow rate
Approx. 68 l/s
(approx. 245 m
3
/h)
Approved fluid
Trotec FluiTect fog concentrate
Fluid quantity
5 l
Fluid consumption at
maximum output
100 ml/min
Fluid consumption at
continuous fog output
30 ml/min
Fogging time at max. stage
Approx. 210 seconds of
continuous fog output
Heating time
After approx. 7 minutes
Operating conditions
5 °C to 45 °C with less than
80 % RH
Storage conditions
5 °C to 45 °C with less than
80 % RH
Scope of delivery
•
1 x Device
FS 200
•
1 x 5 m fog transport hose (plastic DN 38)
•
1 x connector with GEKA coupling
•
1 x 5 l of Fluitect fog fluid in canister
•
1 x Connecting hose fluid canister
•
1 x Quick guide
Optional accessories
•
Aluminium end connectors for poly flat roof
•
Aluminium end connectors for flat bitumen roof
•
Fluitect fog fluid (5 l in canister)
•
flue gas chamber and coloured smoke cartridges for fire
simulation
•
Transport case (trolley)
Transport and storage
Note
If you store or transport the device improperly, the
device may be damaged.
Note the information regarding transport and storage of
the device.
Transport
Before transporting the device, proceed as follows:
•
Before transporting the device, remove the fluid canister,
see chapter Exchanging the canister.
•
Transport the canister separately.
•
Fold the canister holder up for transport, see chapter
Folding the holder up.
•
Only transport the device by use of the transport handle.
Folding the holder up
23
20
21
22
