DL200X operating manual for external sensors
3
EN
���
Battery compartment
���
Battery cover
���
PC connection USB type micro B
���
Network connection RJ45
���
Mount track for fastening
���
LCD display:
���
Measured value row 1
���
Measured value row 2
���
Measured value row 3
������
Display symbol for active acoustic signal
������
Display symbol for active network connection
������
Display symbol for active USB connection
������
Display symbol for power supply over a network
������
Display symbol for power supply over USB
������
Display for battery level
������
Display for mode marker
������
Display for active measured value recording
������
Display for inactive measured value recording
������
Display for date
������
Display for time
������
Mode selection button
������
Data logger for connecting to external sensors
3. Equipment
������
5-pin round connector M12 for connecting up to four digital BUS-compati-
ble sensors:
������
10-pin terminal with two independent input channels for
connecting up to two analogue sensors:
Pin 2:
Data B
Pin 1: Te24V (input, ext.
supply for data logger for stationary
operation); also as external power
supply
Pin 3: Terminal A1
Pin 5: Terminal C1
Pin 7: Terminal A0
Pin 9: Terminal C0
Pin 4: Terminal B1
Pin 6: Terminal D1
Pin 8: Terminal B0
Pin 10: Terminal D0
Pin 1:
Supply sensor
(output)
Pin 3: Data A
Pin 5: n.c.
(not connected)
Pin 4: GND (reference
potential)
Pin 2: Terminal GND
(Supply voltage GND)
