8
EN
condenser dryer DH 25 S / DH 65 S
Inserting the air filter
Note
Do not operate the device without an air filter inserted
into the air inlet!
Without the air filter, the inside of the device will be
heavily contaminated. This could reduce the
performance and result in damage to the device.
•
Make sure that the air filter is installed before switching
the device on.
Connecting the condensation drain hose
The condensate forming during operation has to be drained via
a condensation drain hose. Proceed as follows to connect a
condensation drain hose to the device:
ü
A suitable condensation drain hose (3/4" connection) is
ready for use.
ü
The device is switched off.
1. Connect the condensation drain hose to the condensation
hose connection (5) at the device.
3/4"
2. Make sure that the condensation drain hose is properly
connected to the device and free of damage.
3. Guide the other hose end to a suitable drain or sufficiently
dimensioned collection container. Please note that the
hose must not be kinked.
4. Make sure that the condensation drain hose is installed
with a continuous decline.
Connecting the power cable
•
Insert the mains plug into a properly secured mains
socket.
