background image

6

EN

climate monitoring station BZ06

De-/activating the alarm function and the hourly time signal

1. Switch over into the alarm mode (13) by pressing the

MODE

 button (9).

ð

The indication (4) switches over into alarm mode and
displays 

AL

, the indication (5) displays the alarm time.

2. Press the 

UP

 button (6) to activate the alarm function.

ð

The alarm icon (15) will be indicated on the display.

3. By pressing the 

UP

 button (6) once more you can now in

turn select the following functions:

Hourly time signal activated instead of the alarm function.
The icon for the hourly alarm signal (16) will be displayed
and an acoustic signal is emitted every full hour.

Both the alarm function and the hourly time signal are
activated. Both icons (15, 16) will be displayed.

Both the alarm function and the hourly time signal are
deactivated. None of the two icons (15, 16) will be
displayed.

AM PM

YEAR

15

17

16

No.

Designation

15

Alarm function activated icon

16

Hourly time signal activated icon

17

Snooze function activated icon

Turning off the alarm

When the acoustic alarm signal is emitted, you can turn it off by
pressing any of the buttons (other than 

SNZ

 (8)).

Note:

The alarm will stop automatically after 1 minute if no button is
pressed.

Snooze function

The device comes equipped with a snooze function enabling you
to turn the alarm off for the time being. The acoustic alarm
signal will be emitted once more after approx. 4 minutes:

1. Press the 

SNZ

 button (8) when you hear the alarm.

ð

The alarm will stop and the icon for the snooze
function (17) starts flashing.

2. After approx. 4 minutes, when the acoustic alarm signal is

emitted once more, you can use the snooze function again
by pressing 

SNZ

 (8).

3. To deactivate the active snooze function, simply press any

other button than 

SNZ

 (8).

ð

The icon for the snooze function (17) will stop flashing
and the snooze function is deactivated.

Weather forecast

The device has an indication for the weather forecast (2)
displayed by four symbols:

18

20

19

21

No.

Designation

18

Sunny symbol

19

Partly cloudy symbol

20

Overcast symbol

21

Rain symbol

Info

The device is not fitted with a sensor for atmospheric
pressure. The weather forecast is based on the
changing relative humidity level. If the relative humidity
level changes by more than ± 5 % within one hour, the
indication will be adjusted accordingly.

Summary of Contents for BZ06









Reviews: