9
EN
Operating manual – air washer AW 10 S
Cleaning the plasma generator
Clean the electrodes of the plasma generator about every two
weeks.
Use customary cotton buds for cleaning. You can slightly
dampen the cotton buds with water. If you are using damp
cotton buds, always wipe dry with a dry cotton bud.
ü
The device is switched off and disconnected from the
mains.
1. Loosen the upper screw at the rear of the device with a
suitable screwdriver (Phillips, +).
2. Remove the louvre.
3. Carefully wipe over both electrodes with a cotton bud.
4. Place the louvre back on the device until it engages.
5. Tighten the screw at the rear.
Technical annex
Technical data
Parameter
Value
Suitable for rooms sized up to
25 m² / 63 m³
Humidification performance max.
400 ml/h
Display of relative humidity
20 % to 60 %
Amount of air
66-78-126 [m³/h]
Mains connection
1/N/PE ~ 220V / 50 - 60 Hz
Power input max.
11 W
Sound pressure level
32 dB
Water tank
9 l
Dimensions (packaging excluded,
length x width x height)
315 x 310 x 390 [mm]
Weight (packaging excluded)
6 kg
Water filter
SecoSan
®
Stick 10
