EN
5
soldering station PSIS 11-230V
Intended use
The device
PSIS 11-230V
is intended for soldering electronical
parts in leisure and DIY sectors. It can be used for soldering
works, glue welding plastics or for applying embellishments.
We recommend using the power tool with original Trotec
accessories.
Foreseeable misuse
The device is not suitable for the following applications:
•
for engraving electronic media such as CDs, DVDs etc. as
these can be damaged during engraving.
•
for hard-soldering or for soldering aluminium
Any other use than the one described in the chapter "Intended
use" is regarded as reasonably foreseeable misuse.
Personnel qualifications
People who use this device must:
•
have read and understood the operating manual, especially
the Safety chapter.
Safety signs and labels on the accessories
Note
Do not remove any safety signs, stickers or labels from
the device. Keep all safety signs, stickers and labels in
legible condition.
The following safety signs and labels are attached to the
accessories:
Warning of vapours hazardous to health
This symbol indicates that vapours hazardous to health
can occur during soldering. Always ensure sufficient
ventilation of the workplace!
Personal protective equipment
Wear eye protection.
With it you protect your eyes from splintering, falling
and flying pieces which could cause injuries.
Residual risks
Warning of electrical voltage
Work on the electrical components must only be
carried out by an authorised specialist company!
Warning of electrical voltage
There is a risk of a short-circuit due to liquids
penetrating the housing!
Do not immerse the device and the accessories in
water. Make sure that no water or other liquids can
enter the housing.
Warning of electrical voltage
There is a risk of a short-circuit due to liquids
penetrating the housing!
Do not use the soldering station if there are damages
on the handle, the power cable or the plug. Never open
the device.
Warning of hot surface
Never touch the heated soldering tip or the molten
solder. Risk of burns. Always allow the device to cool
down before changing, cleaning or checking
components of the device.
Warning of hot surface
RISK OF INJURY! Keep your hands away from the
heated workpiece. Heat can be transmitted through the
workpiece.
Warning of hot surface
Some parts of this product can become very hot and
cause burns. Particular attention has to be given where
children and vulnerable people are present!
Warning
Toxic vapours!
During operation gases and vapours are produced
which can be harmful to health.
Wear protection glasses and always ensure sufficient
ventilation.
Warning
Risk of fire!
Only use the holder included in the scope of delivery or
another fireproof base or mat for setting down the hot
soldering iron.
Warning
Risk of fire!
Never leave the activated device unattended.
