EN
7
digital alarm clock with room climate control BZ01
Snooze function
The device comes equipped with a snooze function enabling you
to turn the alarm off for the time being. The acoustic alarm
signal will be emitted once more after approx. 4 minutes:
1. Press the
SNZ
button (
10
) when you hear the alarm.
ð
The alarm will stop and the icon for the snooze
function (
19
) starts flashing.
2. After approx. 4 minutes, when the acoustic alarm signal is
emitted once more, you can use the snooze function again
by pressing
SNZ
(
10
).
3. To deactivate the active snooze function, simply press any
other button than
SNZ
(
10
).
ð
The icon for the snooze function (
19
) will stop flashing
and the snooze function is deactivated.
Weather forecast
The device has an indication for the weather forecast (
1
)
displayed by four symbols:
20
21
22
23
No.
Designation
20
Sunny symbol
21
Partly cloudy symbol
22
Overcast symbol
23
Rain symbol
Info
The device is not fitted with a sensor for atmospheric
pressure. The weather forecast is based on the
changing relative humidity level. If the relative humidity
level changes by more than ± 5 % within one hour, the
indication will be adjusted accordingly.
Indication of minimum and maximum values
The device saves the minimum and maximum values for
temperature and relative humidity. These values can be
displayed by pressing the
UP
button (
9
):
Info
The minimum and maximum values can only be
indicated when the device is in time mode.
1. Briefly press the
UP
button (
9
) once to display the
maximum values.
ð
The maximum values will be displayed along with the
MAX
symbol.
2. Press the
UP
button (
9
) again to display the minimum
values.
ð
The minimum values will be displayed along with the
MIN
symbol.
3. Press the
UP
button (
9
) once more to exit the mode.
Switching the temperature indication between °C and °F
Briefly press the
SET
button (
8
) to switch the indicated
temperature unit from degrees Celsius to degrees Fahrenheit or
vice versa.
Info
Switching between °C and °F can only be
accomplished in the time mode.
Resetting the system
You can reset the system to its initial configuration. To do so,
use a pointed object to press the
RESET
button in the
opening (
11
).
Reset the system if one of the following situations occurs:
•
The battery was changed.
•
If the indication in the display is no longer visible.
•
If you use the buttons and the device does not respond to
their operation.