EN
7
oil-filled radiator TRH 27 E
Start-up
Info
Odours might arise upon initial start-up or after a
longer period of non-use.
When positioning the device, observe the minimum distance
from walls or other objects as described in the chapter
Technical annex.
A
B
C
C
D
•
Before restarting the device, check the condition of the
power cable. If there are doubts as to the sound condition,
contact the customer service.
•
The device may only be operated when fully assembled
and set up in a vertical position on a stable surface.
Operation on instable ground is prohibited.
•
Do not create tripping hazards when laying the power
cable or other electric cables, especially when positioning
the device in the middle of the room. Use cable bridges.
•
Make sure that extension cables are completely unrolled.
•
Make sure that no curtains or other objects interfere with
the air flow.
•
Do not position the device directly below a wall socket.
•
Make sure that the device cannot come into contact with
moisture or water.
Connecting the power cable
•
Insert the mains plug into a properly fused mains socket.
•
Make sure that the power cable is guided along the back
of the device. Never guide the power cable along the front
of the device!
Operation
•
Avoid open doors and windows.
Operating elements
5
6
7
No.
Designation
5
power level flip switch 1300 W
(together with flip switch 7 = 2500 W)
Switch power level on and off
6
Rotary switch of the room thermostat
7
power level flip switch 1200 W
(together with flip switch 5 = 2500 W)
Switch power level on and off
Switching the device on
1. Plug the device into a sufficiently fused socket.
2. Set the power level flip switch (5 or 7) to
I
to select the
desired performance.
ð
You can actuate one flip switch to activate
the 1200 W (7) or 1300 W (5) power level, or both for
the 2500 W maximum power level.
ð
If the power level flip switch (5 or 7) is in position
I
, the
flip switch is illuminated.
