EN
7
convector TCH 1510 E / TCH 2510 E
Wall mounting
Always utilize the help of another person to assemble the
device. Do not try to assemble the device without the help of
another person. The attachment of the device is shown as an
example.
1. Mark the positions for the bore holes on the wall. Observe
the minimum distances specified in the technical data.
2. Drill the holes into the wall at the marked positions.
3. Insert appropriate wall plugs into the bore holes depending
on the type of wall. Position the holder on the wall as
indicated and attach the holder in place with the 4 screws.
4. Hook the lower part of the device into the lower part of the
holder.
5. Hook the device's upper part into the holder.
