8
EN
radiant heater IR 2010 SC
Start-up
Info
Odours might arise upon initial start-up or after a
longer period of non-use.
•
Before restarting the device, check the condition of the
power cable. If there are doubts as to the sound condition,
contact the customer service.
•
Do not create tripping hazards when laying the power
cable or other electric cables, especially when positioning
the device in the middle of the room. Use cable bridges.
•
Make sure that extension cables are completely unrolled.
•
Make sure that there are no curtains or similar objects in
the immediate vicinity.
Prior to initial start-up, insert batteries in the remote control.
Connecting the power cable
•
Insert the mains plug into a properly fused mains socket.
•
Make sure that the power cable is guided along the back
of the device. Never guide the power cable along the front
of the device!
•
Make sure that the mains cable does not touch any hot
parts of the housing.
Operation
Operating elements
9
Remote control
11
10
No. Designation
Meaning
9
On/off switch
Selecting the heating level and LED
element
10
Heating capacity
button
Selecting a heating level of 2000 W
11
LED
button
Activating the LED elements
Warning of hot surface
The grille (
7
) heats up during operation and can still be
hot after switch-off.
Do not touch the grille (
7
) during operation, wait until it
has cooled down after switch-off.
