1. HANGING SYSTEM INSTALLATION
Install mounting bracket to outlet box in ceiling
by using screws included with the outlet box
and washers from the hardware bag.
1A. Installing mounting bracket to ceiling outlet box
1B. Installing Downrod and Yoke
Wires
D
o
w
n
ro
d
A
s
s
e
m
b
ly
Downrod Jam
Screw (2)
(Loosen)
Yoke
Downrod Jam
Screw (2)
(Tighten)
Cotter Pin
Yoke
Cover
Cross Pin
Yoke
Remove cross pin, washer and cotter pin from downrod.
Insert downrod through canopy and yoke cover, and feed motor wires through downrod.
Loosen 2 downrod jam screws at yoke. Insert downrod assembly into yoke.
Insert the cross pin through yoke & downrod and secure with washer and cotter pin.
Tighten both downrod jam screws to further secure downrod.
Pull down the yoke cover to cover yoke.
1C. Hanging the fan
Lift fan assembly onto the mounting bracket.
Rotate the fan so that the groove on the ball engages the ridge on the mounting bracket.
Fan
Assembly
Mounting
Bracket
Outlet Box
Mounting
Bracket
Align key holes to screws
Downrod
Cotter Pin
Cross Pin
Canopy
Yoke Cover
Washer
Mounting
Bracket
Ridge
Ball Groove
