5. BLADE INSTALLATION
P4
FAN MOTOR
AND LIGHT
Detailed instructions are
enclosed with the remote.
3. Making electrical wire connections
3. WIRING CONNECTION
For convenience basic
wiring connections are
shown here
Push up canopy until the screw still in the mounting bracket
is engaged with the large end of the keyhole on canopy.
Rotate canopy slightly until the screw head is engaged
in the narrow end of the key hole.
Insert the remaining canopy screw into the other
hole, and tighten both canopy screws.
4. Installing the canopy
Note: Two screws are pre-installed on mounting bracket for
canopy installation. You will need to remove one and loosen
the other slightly.
4. CANOPY INSTALLATION
Canopy
Screw
Key
Hole
Push up Screw Cover, so that the screws heads
are engaged with the large ends of the key holes
in the Screw Cover.
Rotate Screw Cover slightly until secure.
Screw
Cover
Key
Hole
5. Installing the blades
Raise blade to motor face,
aligning the holes to the motor.
Secure blade to motor face with
blade arm screws and flat washers.
Repeat for remaining blades.