5
501566B Dining Base for 72” x 46” Stoneworks® Top
501566B-34 Counter Base for 72” x 46” Stoneworks® Top
66” x 42” ~ 72” x 46”” OEM Top
Minimum Size:
66”x42” Rectangular with 63”x39” Flat Bottom
Maximum Size:
72”x46” Rectangular Top
Maximum Weight:
300 lbs.
Parts List
Top Ring Assembly
Center Brace
(12) 3/4” Bolts and Lock Washers
(4) 2” Bolts and Lock Nuts
(10) 1-¼ #10 Screws, self-tapping
With 2 persons, place the Table Top Ring Assembly upside down
on the prepared work surface.
Place the Center Brace onto the Table Top Ring Assembly center
stub mounts with the Leg Brace brackets angled up.
Loosely install the bolts and washers to retain the Center Brace to
the Top (2 bolts and washers per side).
Place one Leg upside down (glide feet up) onto the Table Top leg
stub mount with the Leg Brace in the center bracket.
Loosely install the bolts and washers to retain the Legs to the Top
(2 bolts and washers per leg).
Loosely install the bolt and lock nut to retain the Leg Brace into
the center bracket.
Repeat this process until four legs and braces are in place and
loosely retained by hardware.
Fully tighten the bolts on the Center Brace (4 places).
Fully tighten the bolts on the Legs (8 places).
Fully tighten the bolts on Braces (4 places).
Screws included with the base are specific for Tropitone
Stoneworks Table Tops only. Do not use with OEM tops.
6
Tropitone table top attachment
Attach the two middle straps.
Do NOT attach the four straps at the corners.
Continue to page 10 for instructions on installing 10 self-
tapping screws.
Go to Page 10 for instructions on how to attach a
Tropitone table top.
