3
Step 3
CAUTION:
DO NOT REMOVE OR LIFT FURNITURE BY THE
BLACK STRAPS USED FOR CUSHION CONNECTION!
Place the seat cushion with
zipper to the back onto the
Lounger. Wrap the seat
cushion straps around the (2)
black straps and close the
Velcro
®
.
Place the seat cushion with
zipper to the back onto the
Ottoman. Wrap the seat
cushion straps around the (3)
black straps and close the
Velcro
®
.
If necessary, adjust the Glides to level the furniture.
Add the optional throw pillows, then enjoy your furniture!
Alternative Ottoman Configuration
Unscrew (2) glides from each
Ottoman left and right
corners (at straight edge).
Place Brackets onto Glides.
Connect two Glides to the 1
st
Ottoman so connector sticks
out as shown in Step 1. Don’t
fully tighten Glides.
Lift
the 2
nd
Ottoman to 1
st
Ottoman so 2
nd
Ottoman is
resting on its Glides.
Push the two Ottomans together firmly and fully tighten the Glides
onto the 2
nd
Ottoman.
Caution:
don’t cross-thread the Glides;
keep them straight when engaging threads.
Fully tighten the Glides on the 1
st
Ottoman.
Install cushions as described in Step 3 above. If necessary, adjust
the Glides to level the furniture.
4
For additional assembly and product care instructions such as
fabric and woven care, see www.tropitone.com and select Product
Care and select:
Saftety, Care, Maintenance and Warranty Information (PDF)
If you have difficulty understanding any of the instructions and
need assistance while fastening your components together,
please call Tropitone’s Customer Service Center at 949-951-2010.
Tropitone Furniture Co., Inc.
5 Marconi, Irvine, CA 92618
949 951 2010 phone
www.tropitone.com
Part # R9TMIAWOV
Revised: 041410
©2010 Tropitone Furniture Co., Inc.
