R9T12FIRE
Page 5 of 16
Rev. F 10SEP14
WARNING:
The LP Gas
tank or cylinder used must comply
with the following requirements.
Use of other tanks or cylinders
which do not meet these
requirements may create an
unsafe condition which could
cause injury or death to you, or
damage to your personal property,
including the risk of fire or
explosion.
The cylinder or tank used must be:
1. Constructed and marked in accordance with the U. S. Department of Transportation
(D.O.T.) Specifications for LP-Gas Cylinders, or the Standard for Cylinders, Spheres and
Tubes for Transportation of Dangerous Goods and Commission, CAN/CSA-B339 as
applicable;
2. Provided with a Listed overfilling prevention device; and
3. Provided with a cylinder connection device compatible with the connection for the appliance.
IMPORTANT:
The LP Gas tank must be secured in the fire pit by placing the bottom ring in the
tank retaining ring (shown in blue), and securing with the tank retention bolt (shown in red) as
shown. It is important that the tank have a base with mounting holes which align with the gas tank
retaining bolts provided on this unit.
See diagram above.
