51
Center Console Models
•
Owner’s Manual
Supplement
Chapter 7: Plumbing
2503 Baitwell & Seawater Washdown System
Filling & Using the Baitwell
1. If necessary, Open the seawater
intake seacock.
2. On the main switch panel, turn On
the baitwell switch.
•
Open the drain seacock to drain the
baitwell.
•
Close the drain seacock after the
baitwell has drained.
Troubleshooting
If you followed the instructions in
steps 1 and 2 above, but water does
not pump into the tank, possible
causes are:
•
The intake seacock is Closed.
•
A hose is collapsed or there is clog-
ging debris in the system.
•
The baitwell circuit breaker needs
to be reset.
Aeration Tips
The level of aeration is controlled by
the aerator control valve.
•
In clean ocean water little or no
aeration is needed.
•
In brackish back waters a higher
level of aeration may be needed.
Seawater Washdown System (If
Equipped)
1. If necessary, Open the seawater
intake seacock.
2. On the main switch panel, turn On
the baitwell switch.
FROM SEAWATER
INTAKE SEACOCKS
OVERFLOW
DRAIN
BAITWELL
DRAIN SEACOCK
BAITWELL PUMP
NOTE: VIEW IS UNDERSIDE OF DECK
OVERFLOW
AERATION
BAITWELL
INTAKE PUMP
SEAWATER WASHDOWN SEAWATER
INTAKE SEACOCK (IF EQUIPPED)
BAITWELL SEAWATER
INTAKE SEACOCK
DRAIN
CONTROL VALVE
BAITWELL TANK
DRAIN
SEACOCK
TANK
SEAWATER WASHDOWN
INTAKE PUMP (IF EQUIPPED)
SEAWATER WASHDOWN
INTAKE PUMP (IF EQUIPPED)
SEAWATER WASHDOWN
DECK FITTING (IF EQUIPPED)
Summary of Contents for 1703
