Trophy Strike 108487, Operation Manual

Page: 5 / 12

5
Installation
Transom Mounting Installation
Tilt Position Lever
- allows the user to adjust the angle of the motor
Steering Tension Adjustment
- To adjust the steering resistance tighten or loosen
Depth Adjustment Collar
- Adjust the trolling motor up or down by loosening
the collar located on the column directly above the mount. The column can be
adjusted and the motor positioned at the desired depth in the water. Then secure
by tightening the collar.
Transom Mounting Screws
- Allow for easy and fast connection to the vessels
mounting bracket.
Tilt Position
Lever
Steering
Tension
Adjustment
Transom
Mounting
Screws
Depth
Adjustment
Collar
First Time Running
1. Place trolling motor onto the back of the vessel.
2. Lightly tighten the transom mounting screws to the mounting bracket of
the vessel.
3. Press the tilt lever and gently lower the trolling motor’s propeller into the water.
4. Use the depth adjuster collar to adjust the height of the trolling motor.
5. The trolling motor should be between 6” - 12” below the waterline.
Never operate the trolling motor with the propeller out of the water.