7
WWW.TROPHYSKIN.COM
REJUVALITEMD
6
Complete Usage Guide
PART 1: SKIN SENSITIVITY TESTING
Each user’s skin will react differently to RejuvaliteMD. The majority of users
will have absolutely no reaction, but you should conduct a skin sensitivity
1. Place the head of the RejuvaliteMD no closer than 4 inches
from the inner or outer forearm.
2. Put on the included goggles.
3. Turn on the RejuvaliteMD and treat the skin for 5 minutes.
4. Turn off the RejuvaliteMD and wait up to 4 hours. If you notice any excessive
redness, irritation or other reactions, contact Trophy Skin immediately.
If the reaction is painful or progresses, contact your healthcare professional.
PART 2: REGULAR USE OF REJUVALITEMD
NOTE:
Take a pic! The results of RejuvaliteMD are dramatic but gradual
and are best noticed when comparing before-and-after pictures. Before
beginning your first treatment, take a picture of your face in a well-lit room
with your back against a white wall.
Get comfy! RejuvaliteMD can be used hands-free while lying down or sitting up.
1. Wash and dry your face thoroughly. Make sure that all topical creams
or serums have been completely removed.
2. Position the head of the device no closer than 4 inches above the area
to be treated, turning the head so that the LED panel is directly facing the area.
3. Put on the included goggles, ensuring they fit snugly around the eye area.
4. Push the power button and remain still under the light for 5 minutes.
After the 5 minute treatment is completed, the auto-shutoff timer will
turn the device off. Then you can remove the goggles.
5. Repeat this process a minimum of 5 times per week and up to twice
a day for swifter results. The more the device is used in the first 60 days,
the more pronounced the results.
The RejuvaliteMD comes with a custom LED panel that emits 4 powerful
wavelengths of light proven to effectively reduce wrinkles on the face. It contains a 120 LED
bulb panel which is split evenly between Red (660nm), Yellow (590nm), Amber (630nm)
and IR (880nm) light which penetrate the skin at different depths resulting in cellular
level changes.
25% of the LEDs emit infrared (IR) light, which cannot be detected
by the human eye.
They will produce no visible light even when the unit is turned on.
The custom made LED Anti-Aging panel is rated to last years with normal usage.
The LEDs are also covered under our standard 1 Year Warranty. Check the LED
panel for any sign of damage that may have occurred during shipping.
Plug in the power cord into the back of the device, then plug into a standard
100-240 volt wall power outlet. The plug is polarized for your safety.
The LED panel can take up to 5 seconds to power on.
Powering the RejuvaliteMD
